Factory Tour 巡厂
The factory tour is an opportunity for the auditor to observe the production facilities and general working conditions. The tour should be conducted right after the opening meeting, which may last 10 15 minutes. If there is a delay in starting the factory tour,use your best judgment to determine if you should proceed with the audit. The purpose of starting the factory tour right after the opening meeting is to prevent the factory from having an opportunity to prepare workers or the factory premises for the audit.
工厂访问是为审核员提供观察生产设施和综合生产条件的机会。访问应在开始会议结束后立即进行，可能会持续10-15分钟。如果在工厂访问的开始有延迟，审核员则应考虑是否继续进行审核程序。在开始会议之后立刻进行工厂访问的目的在于防止工厂有机会准备工人或对审核作出准备。
The factory tour should start from where most employees work and the auditor should scan and observe all employees to verify if there are any tired, young looking faces or if the factory is trying to hide employees. The auditor should tour all production areas, warehouses, canteens and dormitories (if applicable). While on the tour the auditor
should pay special attention to the following:
巡厂应开始于工人工作几种的区域，审核员应审视、观察所有工人以核实工厂内是否存在疲劳的、幼小的面孔或者工厂是否尝试把工人藏起来。审核员应参观所有的生产区域、仓库、食堂和宿舍（如适用）。在参观过程中，审核员应特别注意一下几点：
● Number of fire extinguishers/hydrants 灭火器/消防栓的数量
● Condition of the fire and safety equipment 消防设备的情况
● First aid kits 急救箱
● Cleanliness of the toilets 洗手间的卫生情况
● Time clocks and time cards 考勤机和考勤卡
● Security guards (are they armed?) 保安人员（他们有武器吗？）
The auditor should make sure the factory is in normal production and verify if Target or TSS products are being made. The auditor should also pay close attention to the labels on the product and/or on the boxes for country of origin. This information can be verified during the country of origin review.
审核员应确保工厂是正常生产，并核实该工厂是在生产Target和TSS的产品。审核员还应注意产品的标签和/或包装盒上的原生产国。此信息可以在审核原生产国时进行检查。
If the factory will not allow the auditor access to a certain portion of the factory (for example, because certain production processes are confidential), the auditor should continue the audit and provide details in the audit comments.
如果工厂不允许审核员访问工厂的某些区域（例如，因为有些产品的加工过程是保密的），审核员应继续（其他区域的）审核，并在审核注解中提供详细信息。